NYX-512 ECoG Probe Reference Design (Altium)
Science Corporation
05/2026
v1.0

Contents
--------
NYX1-512 ECoG Probe.PrjPcb   Altium project file
NYX1_512_ECoG.SchDoc          Schematic
NYX1_512_ECoG.PcbDoc          PCB layout
PrjPCB1.BomDoc                Bill of materials

Requirements
------------
Altium Designer (tested on 24.x and later).

The NYX512 Altium component library (NYX512-Altium-Library.zip)
must be installed before opening this project. See that package's
README for setup instructions.

Setup
-----
1. Install the NYX512 Altium component library first.
2. Open NYX1-512 ECoG Probe.PrjPcb in Altium Designer.

Notes
-----
- This is a complete routing reference for the NYX-512 recording 
ASIC. This example shows NYX-512 routing for a polyimide thin film 
ECoG neural probe.

- If Altium reports missing components, verify the NYX512 library 
is registered under Design -> Add/Remove Library.
